水硬性石灰合成及拉破坏特性试验研究

水硬性石灰在欧洲石质文物修复和加固中获得了很大成功。我国的石质文物主要是砂岩,水硬性石灰的修复效果不好。为满足我国石质文物修复和加固的需求,本文以石灰石和黏土为原料,在950℃煅烧不同时间,制备出水硬性石,对试样的成分、微观形貌、收缩率、抗拉强度和拉破坏过程等进行了研究。结果表明:(1)试样中含有水硬性成分2CaO·SiO2(C2S);煅烧8h时,成分与欧洲水硬性石灰NHL5接近;1.5CaO·SiO2·xH2O(C-S-H)和CaCO3的含量随龄期的增加逐渐增加。(2)龄期1~3d,收缩率较小;龄期4~6d,收缩率以线性规律增加;7d以后,收缩率趋于稳定。(3)局部变形区随拉应力的增加而变大,邻近局部变形区逐渐合并,形成面积更大的应变局部化带;载荷超过峰值后,产生微裂隙;随载荷进一步增加,微裂隙扩展,贯穿整个试件,发展成宏观裂隙,使试件破坏。(4)抗拉强度随龄期的增加而增加,水硬性石灰中C-S-H、CaCO3等相互交织,构成空间致密体,使试件力学强度提高。合成的水硬性石灰物理力学性能与欧洲水硬性石灰NHL5相近,并且成分均匀、可控,在石质文物修复和加固工程中具有良好应用前景。     

A novel rigid wheel for agricultural machinery applicable to paddy field with muddy soil

The working performance of agricultural machinery is largely determined by the walking performance of the wheel when driving in complex unstructured soil. However, the driving performance of existing wheels is not satisfactory for paddy field with muddy soil. The purpose of the current study is therefore to propose a novel rigid wheel for agricultural machinery which is applicable to paddy field with muddy soil. Firstly, a novel arc edge shaped wheel was designed based on the principles of mechanics on the ground. Then the driving performance of this arc edge shaped wheel was evaluated using FE modeling of interaction between rigid wheel and soil. Finally, the structure originally designed arc edge shaped wheel was improved according to FE modeling results, and this improved design was further evaluated by both FE simulation and prototype experiments. Both FE modeling and experimental results indicate that the improved arc edge shaped wheel proposed in this study has a good driving performance with regarding to wheel sinkage and soil reaction force. The proposed arc edge shaped wheel could be used as an effective component of rice harvester for paddy field with muddy soil.     

Nanoscale detection of faint machinery vibration using the NV center in diamond

We propose a novel method for detection of the faint machinery vibration at the nanometer resolution based on the spin magnetic resonant effect. A suspension magnet acts as a vibration sensor to transfer the vibration signals as the magnetic field fluctuation to excite the spin magnetic resonance. Due to the high sensitivity of the magnetic field of the nitrogen-vacancy center in diamond, the theoretical detection limit of mechanical vibration is as high as 5.7 nm, and the actual measurement resolution reached 12.8 nm, and proved the potential for further improvement to ∼pm resolution. The feasibility of this method is verified by dynamic tests. This method provides a novel approach for the detection of micro-mechanical vibrations.     

Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

In Situ Labeling and Distance Measurements of Membrane Proteins in E. coli Using Finland and OX063 Trityl Labels

In situ investigation of membrane proteins is a challenging task. Previously we demonstrated that nitroxide labels combined with pulsed ESR spectroscopy is a promising tool for this purpose. However, the nitroxide labels suffer from poor stability, high background labeling, and low sensitivity. Here we show that Finland (FTAM) and OX063 based labels enable labeling of the cobalamin transporter BtuB and BamA, the central component of the β-barrel assembly machinery (BAM) complex, in E coli. Compared to the methanethiosulfonate spin label (MTSL), trityl labels eliminated the background signals and enabled specific in situ labeling of the proteins with high efficiency. The OX063 labels show a long phase memory time (T_M) of ≈5 μs. All the trityls enabled distance measurements between BtuB and an orthogonally labeled substrate with high selectivity and sensitivity down to a few μm concentration. Our data corroborate the BtuB and BamA conformations in the cellular environment of E. coli.     

基于向后逐步回归模型的我国农机需求特征及影响因素研究

以2004-2014年数据为样本,以农机总动力为因变量,以农机购置补贴、农机价格、农机作业服务价格、农户人均纯收入、农产品价格、农业劳动力数量和农作物播种总面积为自变量构建了我国农机需求影响因素的回归方程,向后逐步回归结果表明:(1)除农作物播种总面积、农机作业服务价格、农产品价格之外,其余变量对农机总动力的影响均统计上显著;(2)农机购置补贴、农机价格指数、农户人均纯收入及农业劳动力四个变量对农机需求的弹性系数分别为0.027、-0.004、0.457、0.474。最后根据研究结果提出加大与落实农机购置补贴、规范农机价格、培育新型经营主体、加速土地规范流转等政策建议。     

Sudden Blocking of a Supercritical Open‐Channel Flow

This paper reports results of experiments in which a steadystate nonuniform supercritical openchannel flow was suddenly blocked by a rapidly falling gate at a downstream distance of about one hundred critical depths. This results in a hydraulic jump propagating upstream. Experimental data on the shape, height, and propagation speed of its leading front are given. It is shown that the parameters of the jump differ significantly from the values found using a quasistationary approach.     

Diffusion of moisture in deformable porous media. Anisotropic fibrous materials

This paper presents a study on the deformation of anisotropic fibrous porous media subjected to moistening by water in the liquid phase. The deformation of the medium is studied by applying the concept of effective stress. Given the structure of the medium, the displacement of the solid matrix is not taken into account with respect to the displacement of the liquid phase. The transport equations are derived from the model proposed by Narasimhan. The transport coefficients and the relation between the variation in apparent density and effective stress are obtained by test measurements. A numerical model has been established and applied for studying drip moistening of mineral wool samples capable or incapable of deformation.Nomenclature D mass diffusion coefficient [L²t^–1] - e void fraction - g gravity acceleration [Lt^–2] - J mass transfer density [ML^–2t^–1] - K hydraulic conductivity [Lt^–1] - K _s hydraulic conductivity of the solid phase [Lt^–1] - K ^* hydraulic conductivity of the deformable porous medium [Lt^–1] - P pressure of moistening liquid [ML^–1 t^–2] - S degree of saturation - t time [t] - V speed [Lt^–1] - X horizontal coordinate [L] - Z vertical coordinate measured from the bottom of porous medium [L] - z z-coordinate [L] Greek Letters porosity - ₁ total hydric potential [L] - _g gas density [ML^–3] - ₁ liquid density [ML^–3] - ₀ apparent density [ML^–3] - _s density of the solid phase [ML^–3] - density of the moist porous medium [ML^–3] - external load [ML^–1t^–2] - effective stress [ML^–1t^–2] - bishop's parameter - matrix potential or capillary suction [L] Indices g gas - 1 moistening liquid - p direction perpendicular to fiber planes - s solid matrix - t direction parallel to fiber planes - v pore Exponent * movement of solid particles taken into account     

微型燃料电池制备及其微通道摩擦性能的研究

阐述了微型燃料电池的制备过程,结合传统燃料电池数学理论和微流体力学,建立了微型质子交换膜燃料电池(μPEMFC)的数学模型,分析了微通道特性(如摩擦系数和水力直径等)对微型燃料电池性能的影响.结果表明:运用Fluent软件对模型进行计算的仿真结果与公开实验数据基本符合,验证了模型正确性;而传统模型的仿真结果小于真实值;当气道的水力直径Dh从348降至100时,电池性能有所上升;而当Dh值降至61.1时,其性能有所下降.     

不同围压作用下非均匀岩石水压致裂过程的数值模拟

从岩石细观非均匀性的特点出发，提出一个描述非均匀材料渗流和破裂相互作用的数值模型。在这个数值模型中，单元的力学、水力学性质根据统计分布而变化，以体现材料的随机不均质性，材料在开裂破坏过程中流体压力传递通过单元渗流，损伤耦合迭代来实现。算例表明，该模型能较好地模拟出岩石类材料在水力压裂作用下，微结构非均匀分布和不同围压比对破裂模式、失稳压力的影响，非均匀性导致试件的开裂压力、失稳压力明显不同，裂纹扩展路径不规则发展，模拟结果和实验结果较为一致。